Mark's Part Number:

Manufacturer: Mill-Rose

Manufacturer's Part: 76085

• Blue Monster® Compression Seal Tape stops problem leaks while under pressure - without turning off the water source! Developed for professional plumbing contractors,Blue Monster Compression Seal Tape is ideal for crisis and long-term applications. Blue Monster Compression Seal Tape features self-fusing layers that form a waterproof compression seal. Seal leaks up to 150 PSI on almost any material, from galvanized and cast iron to copper and all types of plastics and rubber. Blue Monster Compression Seal Tape contains no adhesive. This tape seals by compression, so pulling the tape as tight as possible forms a chemical reaction that fuses the layers of tape into a mass of silicone. Once fused, the silicone mass forms a heavy-duty bond on the leak or connection that serves as an emergency or long-term repair.

• Application- Blue Monster® Compression Seal Tape can be applied on almost any surface material, from galvanized and cast iron to copper and all types of plastics and rubber. It contains no adhesive, so pulling the tape as tight as possible allows it to seal all layers by compression. The harder you pull, the greater the compression. Fusing into a mass of silicone, Blue Monster Compression Seal Tape forms a heavy-duty bond on the leak or connection that serves as an emergency or long-term repair.

• For really rough situations, use an extra layer or two at low tension to create a superball effect on the outside of the sealing area.

•Temperature Stability

• Blue Monster Compression Seal Tape is effective to 500°F / 260°C. You can store this tape in a toolbox or a glove compartment on the hottest or coldest day and it still creates leakproof seals!

• Blue Monster Compression Seal Tape is suitable for use with cold and hot drinking water.

• Electrical

• Just two layers of Blue Monster Compression Seal Tape has a dielectric value of up to 32 KV, and is suitable for many electrical applications including insulating motor leads, joints, terminations and cable jacket repairs

• Temperature Range:-90°C to 260°C / -130°F to 500°F

• Tear Resistance:~ 125 lbf/in

• Elongation:> 325%

• UV Resistance:Highly UV resistant

• Adhesion (Fusion):Standard requirement: "Tape shall not unwind more than 1.0 inch after 3 minutes with an attached load of 600g." Result: <1 inch

• Thermal Stability:-900°C to +260°C / -130°F to 500°F continuous

• Tensile strength:~ 1200 PSI throughout temperature range

• Acids, Alkaline and Chlorine:No negative effect from brief exposure to acids, alkaline or chlorine and can with stand submersion up to 3 days.

• Self-Extinguising: UL standard 94 rating V-O. Tested to IEEE 383 and IEEE 1202 for flammability, selfextinguishes and will not propagate a flame.

• Standard Compliance:ASTM D2240, A-A-59163, ASTM D-149, MIL-I-46852, ASTM D2148, ASTM D3767 Blue Monster Compression Seal Tape specifications meet other international standards not included in this list.

Spec Sheet